SSP: £69.99
Part No: P-MSD8369
Multi-Switch 16 Decoder for Futaba F-Series Transmitters (Not FX)

One decoder is required per multi-switch module on the receiver side. A decoder needs one servo channel only and controls 16 switching channels. With memory function - both channels on a control switch can be switched on at the same time. The memory function can be switched off. The short circuit protected, reverse polarity protected and over temperature protected output stage makes this decoder almost indestructible. Up to three decoders can be used on an F14.

• Short circuit protected
• Reverse polarity protected
• High output currents switchable
• Selectable memory function

Set Contents:
• Multi-Switch 16 Decoder
• User Manual

Recommended Accessories:
• P-CBF14N
• P-MSM8084
Switch Functions 16
Weight 30g
Max Current 1.8V Per Output
Dimensions 62 x 32 x 24mm
Voltage Batt = 4.8-24V & Rx = 4.8-6V
No Load Current 50 mA

Dealer Link
You can purchase this product from any authorised Ripmax dealer from our network across Europe. To find the closest dealer to you, please consult our dealer directory by clicking HERE.